When utilising this installation method, fit the acclimatised boards together and nail at every joist/batten or every 400mm. If you are fixing planks to a timber subfloor which is less than 25mm thick, and has services or concrete beneath, you will need to use 38mm portanails to avoid exceeding the depth of the subfloor and possibly damaging pipes or wires. These are available from Broadleaf showrooms and good tool hire stores. Nails are driven at an angle through the tongue of one board and covered by the next.ĭo this with a Portanailer gun that clamps boards together at the right tension and protects the tongue from damage as it nails. Dried adhesive can be chipped/sanded from the surface of unfinished boards, but removing it is likely to damage the surface of pre-sealed ones.Īs the name suggests, this method of nail fixing a wood floor is not visible once the floor is installed, making it the most popular nail fixing method. If you get any adhesive on the top face of the boards, wipe it off immediately. Leave them to bond before continuing to fit the rest of the room. Fit these rows, making sure that you leave the required expansion gap between the first row and the wall. Use a rubber mallet with an offcut of the flooring as a knocking block to protect the tongues as you knock the boards together.Īpply the adhesive to the sub-floor as per the instructions using the recommended comb size to ensure that correct amount is applied. Making sure that the groove side of the board is facing the wall, select, cut and fit together the first 3 rows before applying any glue to the sub-floor. Read and understand the adhesive instructions before you start. We using recommend Broadleaf Ultra Professional Wood Floor Adhesive which is solvent free and specially designed to deliver optimum performance with our wood flooring. Glue fixing a wood floor means applying suitable adhesive to the surface of the subfloor and then fixing the flooring to this. Follow the manufacturer’s instructions for the application of the adhesive. To fix the wood floor, fit the acclimatised boards together over the underlay, gluing the tongue & groove joints with our Lecol PVA adhesive and knocking the boards together using a rubber mallet and an offcut of the flooring to protect the tongues. Unless you need a sound reducing solution, or have electric underfloor heating, we recommend using a fibreboard underlay which does not compress over time and offers excellent support to the joints between the planks. This method is only suitable for our engineered wood floors (Strata and Essentials boards) that are to be installed over a structural subfloor.Ī floated wood floor must be fitted over a suitable underlay. See our Flooring Selector for guidance on which method we recommend for our wood floors.įloating a wood floor means laying the planks over the subfloor and fixing them to one another rather than to the sub-floor beneath. Which of these are suitable will depend on both the product chosen and the subfloor to which it is being fitted. There are a number of ways that a plank wood floor can be fitted.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |